English
Continued
Amplifier/tuner
DISPLAY/CHARA. DIRECT TITLE INPUT | MULTI |
(CONTRAST) | (DISPLAY PATTERN) | ENTER | JOG |
MD recorder
MD IN lamp MD Loading slot | 0 |
TITLE ¿ CURSOR ¯ | CANCEL | SET |
Continued
6 Input a character.
• EX. When entering “H”
1)Rotate MULTI JOG to select the row where a character you want exists.
• In this example, select the row of “F G H I J.”
Select the row
2)Press one of the DIRECT TITLE INPUT buttons to select the character position in the row.
The selected character is input, and the character entry position moves to the next.
•In this example, press 3 which corresponds to “H” in the row of “F G H I J.”
•To move the character entry position while entering a title, press ¿CURSOR ¯.
•If you have entered an incorrect character, press CANCEL to cancel the last entry.
7 Repeat steps 5 and 6 to input other characters.
•The main display can only show 7 characters at a time. If you enter the 8th character, the first character disappears, and so on.
8 Press ENTER twice to finish title entry.
•If you want to cancel the editing, press TITLE after pressing ENTER once in this step.
9 Press 0to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
You can assign titles during play or recording
•During play: Entering a track title
The MD recorder repeats playback of the current track until you press ENTER twice in step 8 above. When you press it twice, MD stops play.
Entering a disc title
The MD recorder repeats playback of all tracks of the MD until you press ENTER twice in step 8 above. When you press it twice, MD stops play.
•During recording: Entering a track title
The MD recorder continues recording even after you press ENTER twice in step 8 above. When you press it twice, a track title is assigned to the track where you have started the title entry.