Continued
Changing the Title | 5 | Repeat steps 2 to 4 of the current procedure to | |
You can make a correction or change the title. | |||
| correct more characters. | ||
|
|
English
1 Follow steps 1 to 4 of page 34.
2 Press ¿CURSOR ¯to select the character you want to correct.
•Make sure that the character you want to change is flashing.
3 Press CANCEL to delete the character you have selected in the above step.
4 Input the correct character.
1)Press DISPLAY/CHARA. (CONTRAST) to select the character set you want.
2)Rotate MULTI JOG then press one of the DIRECT TITLE INPUT buttons.
6 Press ENTER twice to finish correcting the title.
•If you want to cancel the correction, press TITLE after pressing ENTER once in this step.
7 Press 0to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
To erase all the characters
Press CANCEL repeatedly in step 3 above to erase all the characters, then go to step 6.
Available Characters
Capital letters & Symbols
(Blank) |
(Blank) |
Small letters & Symbols
(Blank) |
(Blank) |
Numerals & Symbols
(Blank)