JVC CA-MD70 Using the Timers, Using Recording Timer, How Recording Timer actually works, English

Using the Timers

English

Amplifier/tuner

CLOCK/TIMER CANCEL SET MULTI JOG

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using these timers, you need to set the clock built in the unit. (See page 10.)

Using Recording Timer

With Recording Timer, you can make an MD of a radio broadcast automatically.

•You can set Recording Timer whether the unit is turned on or off.

•To correct a mis-entry any time during the setting process, press CANCEL.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, turns off the volume, and starts recording on the MD recorder when the timer-on time comes. Then, when the timer-off time comes, the unit automatically turns off (stands by).

The timer settings remain stored in memory until you reset them or disconnect the AC power cord.

1 Press CLOCK/TIMER repeatedly until “REC SET” appears in the main display.

•Each time you press the button, the timer mode changes as follows:

DAILY ON/OFF? DAILY SET REC ON/OFF?

Previous indication Clock REC SET

2 Rotate MULTI JOG to set the hour of the timer-on time, then press SET.

3 Rotate MULTI JOG to set the minute of the timer- on time, then press SET.

4 Rotate MULTI JOG to set the hour of the timer-off time, then press SET.

5 Rotate MULTI JOG to set the minute of the timer- off time, then press SET.

6 Rotate MULTI JOG to select either “FM” or “AM,” then press SET.

– 39 –