Presetting Stations
You can preset 30 FM and 15 AM stations at random. In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1 Tune in the station you want to preset.
• See “Tuning in a Station.”
2 Press SET.
The current preset number starts flashing.
3 Select a preset number. On the unit:
Rotate MULTI JOG, or press < or > of the tuner control buttons.
On the remote control:
Press @or #of the tuner control buttons.
•You can also use the number buttons. (Make sure that you have pressed FM/AM on the remote control before pressing the Number buttons.)
For preset number 5, press 5.
For preset number 15, press +10 then 5. For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
4 Press SET again.
The tuned station in step 1 is stored in the preset number selected in step 3.
•Storing a new station on a used number erases the previously stored one.
AM
FM
When you unplug the AC power cord or if a power failure occurs
The preset stations will be erased in a few days. If this happens, preset the stations again.
Tuning in a Preset Station
1 Press FM/AM.
The unit automatically turns on and tunes in the previously tuned station (either FM or AM).
•Each time you press the button, the band alternates between FM and AM.
2 Select a preset number. On the unit:
Rotate MULTI JOG, or press < or > of the tuner control buttons.
On the remote control:
Press @or #of the tuner control buttons.
•You can also use the number buttons. (Make sure that you have pressed FM/AM on the remote control before pressing the Number buttons.)
For preset number 5, press 5.
For preset number 15, press +10 then 5. For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
To erase a preset station
The following procedure is only possible on the unit.
1Select a preset station number you want to erase.
2Press CANCEL.
The preset number starts flashing in the main display.
3Press SET.
“CANCEL” appears in the main display, and the station frequency stored in the preset number is erased.
English
“MEMORY” does not appear if you press SET on the remote control.
