Continued
7 Press SET. | 4 | Press SET. |
5 Rotate MULTI JOG to select the two adjacent tracks you want to join.
Ex.: When joining tracks 1 and 2
• If you want to cancel the editing, press CANCEL.
8 Press ENTER to finish the editing procedures.
6 Press SET. |
9 Press 0to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
To join the divided tracks again, see the JOIN function. | • If you have selected wrong tracks, press CANCEL, | |
| then select the correct tracks by rotating MULTI | |
| JOG. | |
JOIN Function | • If you want to cancel the editing, press CANCEL. | |
7 Press ENTER to finish the editing procedures. | ||
| ||
|
This function allows you to join two adjacent tracks into one track.
• To do the following procedures, use the buttons and controls on the unit.
• To stop any time during editing process, press MD EDIT.
1 | Insert an MD you want to edit into the MD loading | 8 | Press 0to eject the MD. |
| slot. |
| “WRITING” appears while the editing you have made |
| The MD IN lamp lights. |
| |
2 |
| is being recorded on the MD. | |
|
| ||
Press MD EDIT. | To divide the joined tracks, see the DIVIDE function. |
The MD recorder enters editing mode (with DIVIDE function selected).
3 Rotate MULTI JOG until “JOIN” is selected.
English