English
Continued
Amplifier/tuner
MD EDIT CANCEL SET ENTER MULTI JOG
MD recorder
MD IN lamp MD Loading slot | 0 |
DIVIDE Function
This function allows you to divide one track into two separate tracks. It is useful, for example, when you want to add track marks at a certain point within a track or if you want to separate a recording.
•To do the following procedures, use the buttons and controls on the unit.
•To stop any time during editing process, press MD EDIT.
1 Insert an MD you want to edit into the MD loading slot.
The MD IN lamp lights.
2 Press MD EDIT.
The MD recorder enters editing mode (with DIVIDE function selected).
3 Press SET.
The information of the first track (or the current track, if during play) of the MD appears in the main display, and playback starts.
4 Rotate MULTI JOG to select the track you want to divide.
Ex. When you want to divide track 3
•If you have selected a wrong track, press CANCEL then select the correct track.
5 Press SET when you find the point where you want to divide the track.
The MD recorder repeats the selected point — a portion of 3 seconds length following the dividing point.
•If the dividing point is satisfactory, go to step 7.
•If the dividing point is not satisfactory, go to the next step
6 Rotate MULTI JOG to precisely adjust the dividing point.
•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds from the original point (Position 0).
When you stop rotating the MULTI JOG dial, the unit repeats the newly selected dividing point.
• When you find the right position, go to the next step.