English
Continued
Amplifier/tuner
MD EDIT CANCEL SET ENTER MULTI JOG
MD recorder
MD IN lamp MD Loading slot | 0 |
ALL ERASE Function
This function allows you to erase all the tracks on an MD.
•To do the following procedures, use the buttons and controls on the unit.
•To stop any time during editing process, press MD EDIT.
1 Insert an MD you want to edit into the MD loading slot.
The MD IN lamp lights.
2 Press MD EDIT.
The MD recorder enters editing mode (with DIVIDE function selected).
3 Rotate MULTI JOG until “ALL ERASE” is selected.
6 Press 0to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
Erasing a Portion of a Track
You can erase just a portion of one track by using the DIVIDE, ERASE and JOIN functions.
•To do the following procedures, use the buttons and controls on the unit.
•To stop any time during editing process, press MD EDIT.
1 Insert an MD you want to edit into the MD loading slot.
The MD IN lamp lights.
|
| 2 |
| Press MD EDIT. |
|
|
|
| The MD recorder enters editing mode (with DIVIDE |
|
|
|
| function selected). |
4 |
| 3 |
| Divide a track into 3 portions to isolate the portion |
Press SET. |
|
| to erase. | |
|
| • Use the DIVIDE function by referring to page 29. | ||
|
|
|
| |
|
| 4 |
| Erase the middle portion. |
|
|
|
| • Use the ERASE function by referring to page 32. |
| • If you want to cancel the editing, press CANCEL. | 5 | Join the two remaining portions. | |
5 |
|
|
| • Use the JOIN function by referring to page 30. |
Press ENTER. |
|
|
| |
