English
Continued
To connect audio equipment with an optical digital output terminal
|
|
|
| 220V |
|
|
|
| LINE VOLTS |
|
|
| 230 – | 110V |
GND | AM EXT | FM | 240V | 127V |
AM |
| 75 |
|
|
LOOP |
| COAXIAL |
|
|
LEFT
RIGHT 
IN (PLAY) |
|
LEFT |
|
RIGHT |
|
LEFT |
|
RIGHT |
|
OUT (REC) |
|
DIGITAL IN |
|
OPTICAL |
|
RIGHT | LEFT |
Protective plug
Before connecting the other equipment, remove the protective plug from the terminal.
To optical digital output
Audio equipment with an optical digital output
To audio output
By using both an optical digital cord (not supplied) and an audio cord (not supplied), connect:
•Between the optical digital output terminal on the other equipment and the AUX DIGITAL IN OPTICAL terminal.
•Between the audio output jacks on the other equipment and the AUX jacks.
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
|
| 220V | |
|
| LINE VOLTS | |
| 230 – | 110V | |
AM EXT | 240V | 127V | |
FM |
| ||
| 75 |
| |
P | COAXIAL |
| |
Voltage selector | |||
| |||
Use a screwdriver to rotate the voltage selector so the voltage number the arrow is pointing at is the same as the voltage where you are plugging in the unit.
DO NOT plug in before setting the voltage selector switch on the rear of the unit and all connection procedures are complete.
NOW, you can plug in the unit and other connected equipment FINALLY!
LEFT |
|
RIGHT |
|
IN (PLAY) |
|
LEFT |
|
RIGHT |
|
LEFT |
|
RIGHT |
|
OUT (REC) |
|
DIGITAL IN |
|
OPTICAL |
|
RIGHT | LEFT |
To a wall outlet
If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.
When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.
To stop the display demonstration, press any button on
the unit or the remote control.
