![Restoring the Libraries—RESTORE](/images/new-backgrounds/29102/29102125x1.webp)
Continued
Restoring the Libraries—RESTORE
If you unplug the unit or if a power failure occurs while recording, compressing (Smart Compression), or editing the data into the HDD, the Library information stored in the HDD and what has been actually recorded in the libraries may happen to become unmatched. As a result, you cannot skip tracks or albums as you expect to do in the libraries. If this happens, you can use this function and restore the libraries.
Copying an Album—COPY ALBUM
You can make a duplication of an album. A new album number is automatically assigned to a newly duplicated album.
On the remote control ONLY:
If the HDD includes many albums, select the album number using Search Mode (see page 38) before performing the procedure below.
• NOTICE if you use the RESTORE function, the | 1 |
following may possibly occur even though the HDD is |
|
restored. |
|
–Library names you have assigned may be reset to the original names.
–All albums in the HDD may be renumbered newly and be relocated in libraries.
On the remote control ONLY:
1 Press TITLE/EDIT repeatedly until “LIB. EDIT?” appears in the main display, then press SET.
•The source changes to “HDD” automatically if another source has been selected.
Press TITLE/EDIT repeatedly until “ALBUM EDIT?” appears in the main display.
•The source changes to “HDD” automatically if another source has been selected.
•Each time you press the button, Title/Edit Modes change as follows:
TITLE?
LIB. EDIT?
ALBUM EDIT?
(Library edit)
Canceled TRACK EDIT?
2 |
2 Press SELECT ¢ or SELECT 4to select |
“RESTORE?” |
• Each time you press SELECT ¢ or SELECT 4, | 3 |
| |
“RESTORE?” or “LIB.NAME?” is alternately |
|
selected. |
|
3 Press SET.
4
4 Press ENTER.
“HDD WRITING” appears and the HDD lamp flashes in red while the unit is restoring the libraries.
•If you have performed the above procedure during play, HDD playback stops.
Press SET.
Press SET again.
The currently selected album number flashes.
Press ALBUM + or ALBUM – to select the album you want to copy, then press SET.
The library selection screen appears.
Ex. When selecting Album 9 | The currently selected |
| library flashes. |