JVC CA-NXHD10R manual 8, Connecting Other Equipment, To remove the speaker grille

Models: CA-NXHD10R

1 94
Download 94 pages 3.57 Kb
Page 13
Image 13
To remove the speaker grille

Continued

To remove the speaker grille

The speaker grilles are removable as shown below:

Projections Holes

Speaker grille

To remove the speaker grille, insert your fingers at the top of the speaker grille, then pull towards you. Do the same at the bottom.

To attach the speaker grille, put the projections of the speaker into the holes of the speaker grille.

Connecting Other Equipment

You can connect a cassette deck, etc.—used as a playback and recording device.

When you connect the other equipment, refer also to the manuals supplied with it.

• DO NOT connect other equipment while the power is on.

DO NOT plug in any equipment until all connections are complete.

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

Ex. When connecting a cassette deck

To input (REC)

 

L

 

R

Ex. Cassette deck

R

 

L

 

To output (PLAY)

 

L

 

R

LINE IN

R

LINE OUT

L

 

By using audio cords (not supplied), connect:

Between the audio input jacks on the cassette deck and the LINE OUT jacks—For recording on the cassette deck.

Between the audio output jacks on the cassette deck and the LINE IN jacks—For playing a tape.

– 8 –

Page 13
Image 13
JVC CA-NXHD10R manual 8, Connecting Other Equipment, To remove the speaker grille, Ex. When connecting a cassette deck