Manuals / JVC / Home Audio / Stereo System

JVC CA-NXHD10R manual Connecting Speakers, To connect an outdoor AM MW/LW antenna

Models: CA-NXHD10R

1 94

Download 94 pages 3.57 Kb

Page 12

AM (MW/LW) antenna

AM (MW/LW) antenna

1

2

Vinyl-covered

wire

(not supplied)

3

AM (MW/LW) loop antenna

(supplied)

1 If cords are covered with insulation, twist the core of

the cord at the end of each cord, then remove the insulation.

2 Connect the AM (MW/LW) loop antenna to the AM LOOP terminals as illustrated.

3 Turn the AM (MW/LW) loop antenna until you have the best reception.

To connect an outdoor AM (MW/LW) antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. The AM (MW/LW) loop antenna must remain connected.

For better reception of both FM and AM (MW/LW)

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

Connecting Speakers

You can connect the speakers using the speaker cords.

Use only speakers with the same speaker impedance—more than 4 Ω—as indicated by the speaker terminals on the rear of the unit.

1
2
Red	White
Black	Black
		Speaker
	White	cord
	White
Red
	Red	Red
Black	Black
Right speaker		Left speaker

1 If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation.

2 Insert the end of the speaker cord into the terminal as illustrated.

Match the polarity of the speaker terminals: (+) to (+) and (–) to (–).

• DO NOT connect or disconnect the speakers while the unit is turned on.

•DO NOT connect more than one speaker to one speaker terminal.

– 7 –

Image 12

JVC CA-NXHD10R manual Connecting Speakers, To connect an outdoor AM MW/LW antenna

Contents

COMPACT COMPONENT HDD SYSTEM LVT0859-004ACA-NXHD10R INSTRUCTIONS– G-1– Warnings, Cautions and OthersIMPORTANT for the U.K IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN– G-2– CLASS LASER PRODUCTIMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELSG-3 Caution Proper VentilationFront view Side viewTo keep the continuity of the recorded sounds – G-4–Precautions InstallationPower sources IntroductionContents – 2 –Listening to FM and AM MW/LW Location of the Buttons – 3 –Front Panel Inside of Front Door Display WindowHow to open the front door – 4 –Front Panel •Pressing this button also turns on the unitRemote Control – 5 –Pressing this button also turns on the unit •Pressing this button also turns on the unitConnecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers AM MW/LW antennaTo connect an outdoor AM MW/LW antenna Connecting Other Equipment – 8 –To remove the speaker grille Ex. When connecting a cassette deckPutting the Batteries into the Remote Control Connecting a keyboardBasic Settings Remote control– 10 – Front panelTurning On the Power Setting the Clock– 11 – On the remote control ONLYTo adjust the clock again – 12 –Changing the Display Brightness Changing the Display ContrastBasic and Common Operations – 13 –Remote control VOLUMEAdjusting the Volume – 14 –Selecting the Sources and Starting Play LINEAdjusting the Bass and Treble Sounds AHB 1 AHB AHB OFF canceledBASS TREBLE Source indication canceled – 15 –Using the AAC Sounds AAC SOUND OFF MONO FILM canceledWhat is AAC? HALL MID NIGHT HEAD PHONESRemote control CANCEL SELECTVOLUME Listening to FM and AM MW/LW BroadcastsTuning in to a Station – 18 –To change the FM reception mode FM AMPresetting Stations Tuning in to a Preset Station– 19 – FM AM LINE– 20 – Receiving FM Stations with RDSChanging the RDS Information Searching for Programs by PTY Codes PTY Search– 21 – On the remote control ONLY2 Press PTY code while “PTY SELECT” is flashingAlarm function – 22 –Test function How the Enhanced Other Networks function– 23 – Description of the PTY codesAlarm NonePlaying Back the External Component Remote controlCANCEL SELECT VOLUMEAdjusting the Input Level – 25 –Selecting the External Component 1 When the source is “LINE*,” press and holdChanging the Source Name On the remote control ONLY3 Press SET to finish changing the source name Playing Back CDs CD/CD-R/CD-RW Remote control– 27 – Front panelPrecautions on CD Playback – 28 –Playing Back the Entire CD-NormalPlay When playing a CD-Ror CD-RW– 29 – Basic CD OperationsTo stop playback for a moment To go to another trackTo check the program contents – 30 –Playing at Random-RandomPlay CD PROGRAM– 31 – Repeating Tracks or CD—RepeatPlayProhibiting Disc Ejection—DiscLock REPEAT 1TRKPlaying Back the HDD Hard Disk Drive – 32 –Remote control Front panelPlaying Back the Entire HDD -ContinuousPlay How tracks are recorded into the HDDHDD Configuration 10“ libraries.”– 34 – Basic HDD OperationsAbout HDD indicator About HDD lamp when dimmer is not activated– 35 – Playing Tracks in an Album—AlbumPlayTo select another album To select another library–36 – Playing Albums in a Library—LibraryPlayOn the remote control ONLY 1 Press HDD 3/8, then HDD ALBUM– 37 – Repeating Tracks—RepeatPlayOn the remote control ONLY 1 Press HDD 3/8, then On the remote control ONLYTRACK T.? Canceled LAST 10? Track title? – 38 –ALBUM T.? On the remote control ONLY 1 Press HDD 3/8, thenCanceled —ALBUMT./TRACK TLAST 10? TRACK T.?5 Press ENTER For Album Title SearchFor Track Title Search – 41 – To search for one of the last 10 albums recentlyplayed or recorded—LAST10 ALBUM No.?Recording into the HDD – 42 –Remote control Front panelBefore You Start Recording About the digital formats used for recordingsHow the HDD separates the recorded tracks? About the maximum recording length for one trackUsing Automatic Recording Functions SMART COMP. CD AUTO REC Canceled TU AUTO REC– 44 – 5 Press SET again to finish the setting– 45 – SMART COMP. CD AUTO REC Canceled TU AUTO REC3 Press SET to finish the setting To automatically record CDs—CDAuto Recording– 46 – SMART COMPCD AUTO REC TU AUTO REC– 47 – Recording CDsAAC128kbps AAC 96kbps PCM x1 REC PCM x4 REC PCM x2 REC– 48 – To record a single track during playback5 Press SET to finish the recording To stop while recording, press4 5 – 49 –Recording FM/AM MW/LW Broadcasts AAC128kbps AAC 96kbps– 50 – Recording the External Component5 When playback ends, press 7 to stop recording AAC128kbps AAC 96kbpsTo assign track numbers manually while recording Making Your Own Titles – 52 –Remote control Canceled TRACK EDIT? – 53 –Assigning Titles to Albums and Tracks To assign a title to an album– 54 – To assign titles to tracksOn the remote control ONLY 1 Press HDD 3/8 6 Press ENTEREditing the HDD – 55 –Remote control CANCEL SELECT– 56 – Introducing HDD Editing FunctionsLibrary Editing Album Editing– 57 – Changing the Library Names—LIB.NAMECanceled TRACK EDIT? On the remote control ONLYRestoring the Libraries—RESTORE – 58 –Copying an Album—COPYALBUM Canceled TRACK EDIT?– 59 – Moving an Album—LIB.CHANGEMaking a New Album—MAKEALBUM On the remote control ONLY3 4 – 60 –Erasing an Album-ERASE To make your best album laterErasing All Albums—ALLERASE Copying a Track—COPYTRACKCanceled TRACK EDIT? On the remote control ONLYCopying a Portion of a Track—A-BCOPY On the remote control ONLY3Press SET 6 Press ENTER– 63 – Moving a Track—MOVEOn the remote control ONLY 9 Press SET– 64 – Dividing a Track—DIVIDEOn the remote control ONLY 3 Select a track you want to move fromJoining Tracks—JOIN 4 Press SET when you find the dividing pointOn the remote control ONLY 6 Press SET– 66 – Erasing a Track—ERASETRKOn the remote control ONLY 3 Select two adjacent tracks you want to joinUsing the Timers – 67 –Remote control CLOCK A.P.off /TIMER SLEEPUsing Recording Timer the week you want to perform the timer recordingHow Recording Timer actually works • When you select a week day “Monday” to5 6 7 FM? AM? LINE?Set the timer on-time Set the timer off-timeUsing Daily Timer How Daily Timer actually works– 70 – – – – – – FM?AM?CD?Using Sleep Timer How Sleep Timer actually works1Press CLOCK/TIMER three times 2Press CANCELUsing Auto Power Off Timer Priority1Set Daily Timer as explained on page 3Set Sleep TimerUsing an Optional Keyboard – 73 –Keys Used for Operating This Unit While entering a title, functions in theOperating Procedures Using the Keyboard – 74 –To assign an album title—F1 To assign a track title—F2– 75 – To change a library name—F3To search for an album by entering its title—F6 To search for an album by its number-F5Maintenance Cleaning the unit– 76 – General NotesMessages – 77 –Solution MessageHow to rebuild the HDD SolutionMessage SignificationTroubleshooting – 79 –Symptom FM/AM MW/LW CD playbackSymptom Possible CauseAction HDD recording HDD editing– 81 – Possible CauseAction HDD editingSpecifications Supplied accessoriesAmplifier TunerSAFETY INSTRUCTIONS — SAFETY INSTRUCTIONS — INSTRUCTIONSBEDIENUNGSANLEITUNG: LAUTSPRECHERSYSTEM MANUEL D’INSTRUCTIONS SYSTEME DES ENCEINTESSPECIFICATIONS Connection Anschluß Raccordement AansluitingConexión Collegamento Ansluiting Tilslutning LiitäntäANSCHLUSS HinweisTECHNISCHE DATEN RACCORDEMENTAANSLUITINGEN OpmerkingTECHNISCHE GEGEVENS CONEXIÓNCOLLEGAMENTO ANSLUTNINGAnmArkning SPECIFICAZIONITILSLUTNING HUOMSPECIFIKATIONER LIITÄNTÄ