Erasing All Albums—ALL ERASE
All data in the HDD will be erased.
On the remote control ONLY:
1 Press TITLE/EDIT repeatedly until “ALBUM EDIT?” appears in the main display, then press SET.
•The source changes to “HDD” automatically if another source has been selected.
2 Press SELECT ¢ or SELECT 4 to select “ALL ERASE?,” then press SET.
The confirmation screen appears in the main display.
3 Press ENTER.
The following warning screen appears in the main display.
4 Press SET.
The reconfirmation screen appears in the main display.
5 Press ENTER again.
The HDD lamp flashes in red and “HDD WRITING” appears while the editing you have made is being stored in the HDD.
•If you have performed the above procedure during play, HDD playback stops.
Copying a Track—COPY TRACK
You can make a duplication of a track in the same album or in a different album. A newly duplicated track will become the last track in an album where you copy the track into.
On the remote control ONLY:
If the HDD includes many albums and tracks, select the album and track using Search Mode (see page 38) before performing the procedure below.
1 Press TITLE/EDIT repeatedly until “TRACK EDIT?” appears in the main display.
•The source changes to “HDD” automatically if another source has been selected.
•Each time you press TITLE/EDIT, Title/Edit Modes change as follows:
TITLE? 
LIB. EDIT? 
ALBUM EDIT?
(Library edit)
Canceled 
TRACK EDIT? 
2 Press SET.
3 Press SET again.
The currently selected track of the current album flashes.
4 Select a track you want to copy.
1)Press ALBUM + or ALBUM – to select the album.
2)Press SELECT ¢ or SELECT 4to select the track.
•You can select the track directly using the number buttons. In this case, the selected track starts playback repeatedly.
Ex. When selecting Album 5, then Track 9
