JVC CA-NXHD10R Basic CD Operations, Programing the Playing Order of the Tracks -Program Play

About CD indicator

CD	CD	CD	CD
Source is	A CD is	During	During
“CD,” but no	loaded	playback	a pause
CD is loaded

Basic CD Operations

While playing a CD, you can do the following operations.

To stop playback for a moment

Press CD 3/8.

To resume play, press CD 3/8again.

To locate a particular point in a track during play

Press and hold ¢or 4 during play.

•¢ : Fast-forwards the tracks.

•4 : Fast-reverses the tracks.

To go to another track

Press ¢or 4repeatedly.

•¢ : Skips to the beginning of the next or succeeding tracks.

•4 : Goes back to the beginning of the current or previous tracks.

Before starting play, you can continuously skip or go back to any track by holding the button.

To go to another track directly using the number buttons

Pressing the number button(s) on the remote control allows you to start playing the track number you want.

Ex. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

To change the information shown in the main display

Each time you press DISP/CHARA on the remote control,

the information in the main display changes as follows:

1 2 3

4

Clock

1Current track number

2 Elapsed playing time

3 Remaining recording time in the HDD, calculated based on the current setting of the recording mode

4 Recording mode currently selected

Programing the Playing Order of the Tracks —Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

On the remote control ONLY:

1 Load a CD.

2 Press CD 3/8, then 7.

The source is changed to “CD.”

3 Press FM/PLAY MODE repeatedly until “CD

PROGRAM” appears in the main display.

The PROGRAM indicator lights up on the display.

AAC 128

PROGRAM PROGRAM

indicator

•If a program has been stored in memory, it will be called up.

– 29 –