JVC CA-NXHD10R manual Using Recording Timer, How Recording Timer actually works

Before using these timers, you need to set the clock built in the unit (see page 11).

Continued

There are three timers available—Recording Timer, Daily Timer, and Sleep Timer. In addition, you can use Auto Power Off to turn off the unit automatically.

•When you use more than one timer, make sure to give the unit at least one-minute interval between timers; otherwise, the unit cannot start the timer with a later on- time.

Using Recording Timer

2 Press SELECT ¢ or SELECT 4to select the timer number (REC TIMER 1, 2, or 3) you want to use, then press SET.

The day-of-the-week setting screen appears.

Ex. When selecting “REC TIMER 2”

With Recording Timer, you can make an unattended		3 Press SELECT ¢ or SELECT 4to select the day of
recording. This unit can memorize three daily or weekly
			the week you want to perform the timer recording.
Recording Timer settings (Recording Timers 1, 2, and 3).			• Each time you press the button, the day-of-the-week
You can set Recording Timer whether the unit is turned on				settings change as follows:
or in standby mode.
				Mon (Monday) OTue (Tuesday) O
• To return to the previous screen any time during the
process, press CANCEL.				Wed (Wednesday) OThu (Thursday) O
				Fri (Friday) OSat (Saturday) OSun (Sunday) O
How Recording Timer actually works				Sat–SunOMon–FriOMon–SatOEvery O
“REC TIMER (with an active timer number) STANDBY”				(to the beginning)
starts flashing in the main display about one minute before
the timer on-time (the REC indicator and the timer number
indicator also start flashing on the display). When the timer
on-time comes, the unit starts recording into the HDD (no
sound comes out during recording). Then, when the timer				Ex. When selecting “Mon (Monday)– Fri (Friday)”
off-time comes, “REC TIMER OFF” flashes, and the unit
			• When you select a week day (“Monday” to
automatically turns off (on standby). The recording is
				“Sunday”), the recording timer works at the set time
automatically assigned the youngest unused album number
				on the same day weekly.
and is stored in “Library 1.”
			• When you select “Sat–Sun,” the recording timer
• Recording Timer settings remain stored in memory until
				works at the set time both on Saturday and Sunday
you reset them or unplug the AC power cord.
				every week.
On the remote control ONLY:			• When you select “Mon–Fri,” the recording timer
				works at the set time on Monday through Friday.
1 Press CLOCK/TIMER repeatedly until “REC TIMER
			• When you select “Mon–Sat,” the recording timer
				works at the set time on Monday through Saturday.
SET UP” appears in the main display.
			• When you select “Every,” the recording timer works
The REC (Recording Timer) indicator and the number
				at the set time every day.
indicator for the currently selected timer start flashing
on the display. Then the timer number also starts		4 Press SET.
flashing in the main display.
			The timer on-time setting screen appears.
			• If you have set the timer before, the previously set
AAC 128				timer on-time will appear (instead of “– – : – –”).
	REC
REC 1

(Recording

Timer) indicator

– 68 –