5
6
7
Set the timer on-time.
1)Press SELECT ¢ or SELECT 4to adjust the hour, then press SET.
The minute digit starts flashing.
2)Press SELECT ¢ or SELECT 4to adjust the minute, then press SET.
The timer
•If you have set the timer before, the previously set timer
Set the timer off-time.
1)Press SELECT ¢ or SELECT 4to adjust the hour, then press SET.
The minute digit starts flashing.
3)Press SELECT ¢ or SELECT 4to adjust the minute, then press SET.
The recording source setting screen appears.
Select the source to record from.
1)Press SELECT ¢ or SELECT 4to select the source.
•Each time you press the button, the sources change as follows:
FM? 
AM?
LINE?*
(TAPE?/DBS?/VCR?/TV?/GAME?)
*If you have changed the source names, the changed names will appear in the main display (see page 26).
2)Press SET.
3)When you select “FM?” or “AM?” as the source, press SELECT ¢ or SELECT 4again to select a preset channel number, then press SET.
•If you select “–
When you select the external component as the playback source, prepare the external component with the timer function.
The recording mode setting screen appears.
8 Press SELECT ¢ or SELECT 4to select the recording
The REC indicator and the timer number indicator stop flashing and remain lit on the display.
The contents of this setting are shown in sequence.
Ex. When selecting “AAC128 REC?”
• For each recording mode, see page 43.
9 Press STANDBY/ON 
to turn off the unit if necessary.
To turn off the Recording Timer after its setting is done
1Press CLOCK/TIMER once.
The currently selected Recording Timer ON/OFF setting screen appears in the main display.
Ex. When Recording Timer 2 is currently selected
2Press SELECT ¢ or SELECT 4to select the timer number (REC TIMER 1, 2 or 3) you want.
3Press CANCEL.
The selected Recording Timer will be turned “OFF,” and the timer number indicator goes off from the display. (If the other two Recording Timer settings have been also turned off, the REC indicator also goes off.)
To turn on the Recording Timer, repeat steps 1 and 2, and press SET in step 3.
The REC indicator and the timer number indicator for the currently selected timer light up on the display. The settings you have stored are shown in the main display for your confirmation.
•“REC TIMER (with the current timer number) NO SET” appears and “SET REC!” flashes in the main display if no timer setting has been done for the currently selected Recording Timer.
If recording is performed when the timer
Recording Timer does not work at all.
If you press CLOCK/TIMER, SLEEP, or TITLE/EDIT
during timer recording
Recording Timer is canceled temporarily. Recording continues, but the unit will not turn off when the timer
• If you press 7 or turn off the unit, recording stops.
