Attaching Option Parts (for DT-F9L5)

Caution

●Do not rest your arm on the monitor or lean against the monitor.

●Do not touch the LCD panel when installing the monitor.

Attaching the tripod base

You can select the attaching point according to your purpose—at the top or the bottom of the monitor.

Then you can attach the monitor to other devices by using the screw holes on the tripod base (1/4-20UNC or 3/8-16UNC).

CAUTION

●Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.

●Fix the tripod base with the provided screws. Other screws may cause faulty installation or damage to the monitor.

Attaching to the bottom of the monitor

Fix the tripod base with screws.

1/4-20UNC

tripod base

(provided) 3/8-16UNC

screw for tripod base (provided)

Attaching the battery pack

Attach the external battery pack for the DC power supply.

●Use an IDX V-Mount E-HL9S (ENDURA-HL9S) external battery.

CAUTION

●Do not use the external battery for DC 24 V power supply.

Attaching to the top of the monitor

Detach the carry handle before attaching the tripod base(1), then fix the tripod base with screws(2).

carry handle

screw for tripod base

(provided)

 

1

 

 

3/8-16UNC

 

1/4-20UNC

 

tripod base

 

(provided)

 

2

Reverse the above to attach the carry handle.

CAUTION

●Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury.

Attach the battery pack

Attach the battery by moving the battery in the direction of the arrow.

Detaching the battery pack

Detach the battery by moving the battery in the direction of the arrow by holding down the eject button.

battery eject button

26