Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel.

Do not use the product for a long time if the sound is distorted.

Use only the power source specified on the unit.

•AC power: 120 V/220 V — 240 V, 50 Hz/60 Hz (DT-V9L5 only)

•DC power: 12 V — 17 V

Labels with the trade mark, model name and power rating are on the bottom and the top of the monitor.

•(DT-V9L5 only)The AC power supply is controlled by turning on/off the POWER switch on the rear panel. If the product is installed in a place where you cannot easily turn on/off the POWER switch, control the AC power supply by plugging/ unplugging the power cord into/from the AC outlet. In this case, install the product as close to the AC outlet as possible, and leave enough space for plugging/unplugging the power cord. If the product is installed in a place where you cannot easily plug/unplug the power cord, equip an easily accessible device to the wiring of the building for turning on/off the power.

•When the product is left unattended and unused for a long period of time, unplug it from the wall outlet and disconnect the cable system.

•Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

•Use only the accessory cord designed for this product to prevent shock.

•Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered.

•Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-circuit the parts, which could result in a fire or electric shock.

•Never spill liquid of any kind on the product.

•Never place anything on the product. (Placing liquids, naked flames, cloths, paper, etc. on the product may cause a fire.)

•Do not apply any strong shock to the LCD panel. (Do not hit any object against it or push it with a sharp-pointed tool.)

•Do not put heavy objects on the product.

•Do not step on or hang on the product.

WARNING (DT-V9L5 only)To prevent injury by accidental fall

Fix the monitor to a wall by using strings.

Fixing the monitor

Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two holes on the upper side) using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durable string.

The illustration of the monitor is of DT-V9L5.

Hook and screw (M4 x 10 mm)

Hook (not provided)

(not provided)

 

3