Menu Configuration (cont.)

Focus Assist (DT-F9L5 only)

Settings for the focus assist function.

Item

To do

Setting value

Focus Assist Mode

Activate / deactivate the function.

Off, On

 

 

 

Focus Assist Color

Setting the focus assist color.

Red, Green, Blue

Peaking Frequency

Setting the frequency of focus assist.

Low, Middle, High

Peaking Gain

Setting the gain of focus assist.

1 to 10

●When the function is turned on, the area in focus is colored in the selected color.

●When the function is turned on, the color is off.

●When the function is turned on, FA is displayed on the monitor as below.

FA

Signal Setting

Settings for input signals.

Item

To do

Setting value

Video/Component Select

Selects the signal type you want to use for VIDEO/COMPONENT terminals.

Video, Component

I/P Mode

Selects a proper mode corresponding to the input picture.

Normal, Cinema

Color System

Select the color system.

Auto, NTSC, PAL, SECAM,

 

• If the picture is unstable with “Auto,” select the color system according to the input signal.

NTSC 4.43, PAL-M, PAL-N,

 

 

PAL60

sub menu

Display the sub menu which enables you to adjust the items in “Signal Setting” while viewing the actual picture.

reset

Restore the default settings for all the items in “Signal Setting”.

 

Marker*1

Settings for marker functions.

Item

 

To do

 

Setting value

1/2

 

Area Marker

Activate/deactivate the area marker and select the style of it.

Off, Line, Half, Half+Line

 

 

 

The setting values and features are as follows.

 

 

 

 

Off

: Deactivate the marker.

 

 

 

 

Line

: Displays the area with an outline.

 

 

 

 

Half

: The area outside the specified aspect ratio of the screen is displayed at 50%

 

 

 

 

 

transparency.

 

 

 

 

Half+Line : The area of the specified aspect ratio of the screen is indicated by an outline,

 

 

 

 

 

and the area outside of that is displayed at 50% transparency.

 

 

 

Marker Aspect

Select the aspect ratio of the area marker.

4:3, 16:9, 14:9, 13:9, 2.35:1,

 

 

 

 

 

1.85:1, 1.75:1, 1.66:1

 

 

Safety Marker

Activate/deactivate the safety marker and select the style of it.*2

Off, Line, Half, Half+Line

 

 

Safety Area

Adjust the area of the safety marker.

80% to 100%

 

 

Frame*3

Displays/Hides the video area.

Off, On

 

 

Center Marker*3

Displays/hides the marker indicating the center position of the picture.

Off, On

 

 

Line Brightness

Adjust the brightness of the marker.

Low, High

2/2

 

R-Area Marker

Activate/deactivate the area marker and select the style of it.*2

Off, Line, Half, Half+Line

 

 

R-Marker Aspect

Select the aspect ratio of the area marker.

4:3, 16:9, 14:9, 13:9, 2.35:1,

 

 

 

 

 

1.85:1, 1.75:1, 1.66:1

 

 

R-Safety Marker

Activate/deactivate the safety marker and select the style of it.*2

Off, Line, Half, Half+Line

 

 

R-Safety Area

Adjust the area of the safety marker.

80% to 100%

●The area marker or the safety marker is displayed by using MARKER button or external control.

●“R” means “REMOTE (External control)”. Select either non-“R-” items or “R-” items to activate by using external control. (☞ “External Control” on page 42)

●When a picture is displayed in 4:3 aspect ratio, the safety marker for the 4:3 area is displayed.

●To display the safety marker for the area of a picture displayed in 16:9 aspect ratio, set Area Marker to "Off".

*1

Memorized for each input.

*2

The setting values are the same as that of “Area Marker”.

*3

In 1:1 mode, this display is grayed out and cannot be operated.

34