●Setting of “Character Setting”

1Change the input to one that you want to assign a video source name for.

2 Select “Character Setting”.

3 Pressbuttons to select the first character.

●Each time you press button, the character changes as follows. Pressbutton to reverse the order.

Space

4Pressbutton to move the arrow to the next space.

● The characters entered before moving the arrow are memorized.

5Repeat steps 3 and 4 (10 characters at maximum).

6 Press MENU button to store the name.

Character Setting

Character Setting

●How to use the LCD Saver

1.Set reduced function to perform.

2.Set both time for starting the function and time for letting it work.

3.Activate the STANDBY MODE by Execute.

■Aborting the ongoing LCD Saver

Operating this apparatus may lead to aborting the OPERATION MODE.

■Stopping the operation

Executing “Cancel”. Turn off the power.

●Once operating the function, unless turned off the power or executed “Cancel”, reduced function is automatically performed every 24 hours.

■Example of setting up “1st Start” and “Work Time”

0h

2h

4h

6h

8h

10h

12h

14h

16h

18h

20h

22h

24h

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LCD Saver in

 

 

LCD Saver in

 

 

 

 

 

 

LCD Saver in

 

 

 

 

 

 

 

 

standby

 

 

 

 

operation

 

 

 

 

 

 

standby

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time to set in

the 1st Start

Time to set in

Work Time

Timing to run "Execute"

●IMD (In-monitor Display)

This unit supports “TSL UMD Protocol – V4.0” from Television Systems Ltd.

16 character text display and one tally on each side can be controlled. The color of both the text and the tally can be set.

Using the address setting, up to 127 units can be controlled individually. To use, set the external control terminals of this unit to serial format.

For details of control commands, refer to the homepage of Television Systems Ltd.

CAM-01

Tally 1

Text display area

Tally 2

* Example of lower screen IMD display

●Low Power Mode

Puts the unit into Low Power Mode 30 seconds after the monitor is switched off (standby) to further reduce power consumption.

•Low Power Mode will not activate when “Remote Active On Standby” on the Set-up Menu is set to “On”.

•The power lamp will be turned off during Low Power Mode.

41