Main Menu
Picture Function
Setting for the picture quality.
Item | To do | Setting value |
Backlight | Adjusts the brightness of the display. | |
Aperture*1 | Activates/deactivates the function at the level set in “Aperture Level”. | Off, On |
Aperture Level*1 | Compensate the frequency response of the luminance signal of the video signal. | 01 to 10 |
CTI | Adjust the clearness of the outlines of the chrominance signal. | Off, Normal, Hard |
LTI | Adjust the clearness of the outlines of the luminance signal. | Off, Normal, Hard |
Gamma | Select the Gamma correction value. 2.2 is equivalent to Υ 2.2, 2.35 is equivalent to Υ 2.35, | 2.2, 2.35, 2.45, 2.6 |
| 2.45 is equivalent to Υ 2.45, 2.6 is equivalent to Υ 2.6. |
|
Color Temperature | Select the color temperature. | 9300K, 6500K, User |
sub menu | Display the sub menu which enables you to adjust the items in “Picture Function” while viewing the actual picture. | |
reset | Restore the default settings for all the items in “Picture Function”. |
|
*1 Memorized for each input.
Size/Position Adjust
Adjusts the size and position of the picture.
Item | To do | Setting value |
H Size*1 | Adjust the horizontal picture size. |
|
H Position*1 | Adjust the horizontal picture position. | Setting value varies |
V Size*1 | Adjust the vertical picture size. | depending on the signals. |
V Position*1 | Adjust the vertical picture position. |
|
sub menu | Display the sub menu which enables you to adjust the items in “Size/Position Adjust” while viewing the actual picture. | |
reset | Restore the default settings for all the items in “Size/Position Adjust”. |
|
*1 Memorized for each signal format.
Aspect
Sets the aspect ratio of the screen for displaying videos.
Item | To do |
| Setting value | |
Auto Aspect | Select whether to adjust the aspect ratio (horizontal to vertical ratio of the screen) of the SD | Off, On | ||
|
| signal automatically or manually (Manual Aspect). | ||
|
|
| ||
Manual Aspect*1 | Sets the aspect ratio (horizontal to vertical ratio of the screen) of the SD signal. | 16:9, 4:3 | ||
SD4:3 Size*1,*2 | Selects the picture size when the input signal format is 4:3. |
| ||
|
| Normal | : Matches the vertical picture size to the number of pixels. |
|
|
| H Full | : Matches the horizontal picture size to the horizontal size of the screen. At | Normal, H Full, V Full |
|
|
| this time, the top and bottom of the picture are overscanned. |
|
|
| V Full | : Enlarges the picture vertically. |
|
16:9 Size*1,*2 | Selects the picture size when the input signal format is 16:9. |
| ||
|
| Normal | : Matches the vertical picture size to the number of pixels. | Normal, V Full |
|
| V Full | : Enlarges the picture vertically. At this time, the right and left of the | |
|
|
| ||
|
|
| picture are overscanned and markers are displayed. |
|
1:1*3 | Displays the picture in the original resolution of the input signal. |
| ||
|
| • The aspect ratio of the picture may change depending on the input signal. | Off, On | |
|
| • When the picture is overscanned, markers are displayed at the top, bottom, left and right. |
| |
*1 | Not activate when picture is displayed in the 1:1 mode. |
| ||
*2 | When the histogram, wave form monitor or vector scope is displayed, only "Normal" is available. |
| ||
*3 | When the histogram, wave form monitor or vector scope is displayed, only "Off" is available. |
| ||
Dynamic Setting values: Off, On
Adjusts the picture to be suitable for a bright place.
•When the function is turned on:
-“Backlight” and “Picture Sub Adjust” are grayed out and cannot be operated.
-The setting of “Backlight” is ineffective.
Zebra (DT-F9L5 only)
Settings for displaying the range of brightness.
Item | To do | Setting value | |
Zebra Mode | Activate / deactivate the function. | Off, On |
|
|
|
|
|
Setting the maximum brightness of an image for Zebra. “Over” means the range which exceeds 100%. | 5% to 100% | (by 5%), Over | |
Setting the minimum brightness of an image for Zebra. | 0% to 100% | (by 5%) | |
33