Connecting the speakers
The left and right speakers are the same.
Before connecting the speaker cables, twist and pull off the insulation at the end of each speaker cable.
Speaker terminal | Speaker cable | Speaker terminal | Speaker cable |
Preparation
Speaker cable |
|
(supplied) | Black line |
Black line |
|
|
Right speaker (rear view) | Main unit (rear view) | Left speaker (rear view) |
■IMPORTANT
•Improper speaker cable connection reduces the stereo effect and sound quality.
•The supplied speakers are magnetically shielded, but color irregularity may occur on the TV depending on some conditions. To prevent color irregularity, set up the speakers following the instructions below.
1.Turn off the main power of the TV before setting up the speakers.
2.Place the speakers enough distance from the TV so that they do not cause color irregularity on the TV.
3.Wait for approximately 30 minutes before turning on the main power of the TV again.
The speakers employ natural wood for the diaphragm and the cabinet in order to reproduce the original sound faithfully. The appearance therefore differs for each system.
CAUTION
•Do not
•The impedance of speakers connected to the main unit must be within the range of 4 Ω to 16 Ω.
•Do not connect other speakers together with the supplied speakers. The change in impedance may damage the main unit and the speakers.
You can detach the speaker cover.
Speaker cover
8