Selecting the output level

When outputting the audio signal from the [LINE1 OUT] terminal to another audio device, you can select the audio level.

Press [OUTPUT LEVEL].

•Each time you press [OUTPUT LEVEL], the dis- play changes as follows.

“OUTPUT LOW” : the initial setting

“OUTPUT HIGH”

NOTE

•You cannot use this function when a device con- nected to the [LINE1 IN] terminal is selected as the source.

QP LINK

When you start analog playback of a portable digital audio player connected to the [LINE1 IN] terminal while the main unit is off or another source is selected, the main unit automatically turns on and the source changes to the connected portable digital audio player. This function is called the quick portable link function (QP LINK).

Activating QP LINK

Press [QP LINK] repeatedly to select “QP LINK ON” in the display window.

• To deactivate QP LINK, select “QP LINK OFF”.

Using QP LINK

■When “QP LINK ON” is selected

1 Connect a portable digital audio player to the [LINE1 IN] terminal using an audio cable.

Main unit (front view)

Stereo mini plug cable

(not supplied)

 

Portable digital audio player or

Output

other audio device

2 Start playback on the portable digital audio player.

•If the main unit is off, the main unit automati- cally turns on.

•The source from the portable digital audio player is automatically selected, “LINE1” is displayed and sound is produced.

•The QP LINK function is not activated when “DISPLAY OFF” is selected. (Refer to page 18.)

NOTE

•QP LINK works when the “QPL” indicator is dis- played.

•Even when “QP LINK ON” is selected, the “QPL” indicator may not light up. For example, when you finish step 2, stop playback and then select another device as the source, the “QPL” indica- tor turns off for 30 seconds. At this time, how- ever, you can use QP LINK by disconnecting the stereo mini plug cable and connecting it again.

Playing back sources from other devices

46