Preparation (continued)

Do not turn on the power until you complete the connection.

 

 

Preparation

Connecting a portable digital audio player

Listening to analog sound from a portable digital audio player

Main unit (front view)

Input

Stereo mini plug cable (not supplied)

To an audio output terminal (such as a headphone terminal)

Portable digital audio player or other audio device

Output

Outputting analog sound to a portable digital audio player

Main unit (front view)

Output

Stereo mini plug cable (not supplied)

To an audio input terminal

Portable digital audio player or other audio device

Input

The audio output signal from the [LINE1 OUT] or [LINE 2 OUT] terminal is processed to resemble surround sound when the K2 function, clear voice function, 3D PHONIC function, or headphone surround mode function is activated. To record raw, unprocessed sound, turn off these functions. Do not turn the K2 function on or off while recording sound, as this may cause intermittent sound output.

•An audio signal from a device connected to the [LINE1 IN] terminal is not output via the [LINE1 OUT] terminal.

Connecting a subwoofer

When you connect this system with an amplifier- built-in subwoofer (not supplied), you can enjoy a more dynamic bass sound. Refer to the manual of the subwoofer for details.

Audio cable (not supplied)

(You can use the audio cable supplied with the amplifier-built-in subwoofer.)

Amplifier-built-in subwoofer

Main unit

(not supplied)

(rear view)

Producing sound from the subwoofer

Press [S.WFR OUT] to select“S WOOFER ON” (Subwoofer on) in the display window.

•Each time you press [S.WFR OUT], the display toggles between “S WOOFER ON” and

“S WOOFER OFF” (Subwoofer off).

NOTE

•When “S WOOFER ON” is selected, the bass sound from the left and right speakers is auto- matically turned down, and the bass sound is emitted mainly from the subwoofer.

11