Timer (continued) | For the locations of the remote |
control buttons, refer to page 47. | |
|
|
|
|
Timer
The indicator lights up when the playback timer is activated.
•The playback timer is available only when the main unit is off.
NOTE
•Turn off the main unit by at least 1 minute prior to the starting time you have selected in step 3.
•While setting the playback timer, you can return to the previous step by pressing [CANCEL] or you can stop the setting by pressing [CLOCK/ TIMER].
•When the playback starts, the volume gradually increases to the selected level.
•You can make a variety of playback settings by combining the playback timer and the settings for program playback, random playback or repeat playback. (Refer to pages
•When “LINE1” is selected as the source and “QP LINK ON” is selected, the playback timer acti- vates even if the main unit is turned on. (Refer to page 46.)
Canceling the playback timer
1 Press [CLOCK/TIMER].
2 Press [CANCEL].
Activating the playback timer again
1 Press [CLOCK/TIMER].
2 Press [ENTER].
•The current playback timer setting appears in the display window.
3 Press [FAUDIO] to turn off the main unit.NOTE
•When the power cable of the main unit is discon- nected from the AC outlet or the power is inter- rupted, the clock and the playback timer settings may be lost. If the settings are lost, set the clock and playback timer again.
Confirming the playback timer settings
1 Press [CLOCK/TIMER].
2 Press [ENTER].
•Each of the playback timer settings are dis- played in turn every 2 seconds.
Changing the playback timer settings
Set the playback timer again from the start.• Refer to steps 1 - 8 on pages 48 and 49.
NOTE
•Even after you cancel the playback timer, the setting remains stored.
49