Using the AV COMPU LINK function

When a JVC-manufactured TV with AV COMPU LINK II or III terminals is connected to the main unit using these terminals, operating either the TV or the main unit controls the other device at the same time.

Preparation for the AV

COMPU LINK function

NOTE

•Some JVC-manufactured TVs have terminals labeled “AV COMPU LINK”. These terminals are the same as the [AV COMPU LINK] terminal on the main unit of this system or, the “AV COMPU LINK I/II” or “AV COMPU LINK” terminal on other JVC-manufactured systems.

•Refer to “OTHERS” on page 43 for determining the “AV COMPULINK MODE” setting.

•Also refer to the manual of the TV to be con- nected to the main unit.

Main unit (rear view)

AV COMPU

LINK

II or III

JVC-manufactured TV

Operating the AV COMPU LINK function

1 Turn on the main power of the TV.2 Play back a disc/file.

•Refer to pages 21–23.

•The power of the TV is turned on.

•The input mode on the TV changes to either the video 1, video 2 or video 3 (DVD) input.

Reference

 

Connection cable

 

(not supplied)

 

 

Input terminal on the

“AV COMPULINK

TV

MODE” setting

Video 1

DVD2

 

 

Video 2

DVD3

 

 

Video 3

DVD1

 

 

•The AV COMPU LINK function may not work for some TVs when the main unit is connected to the TV via the video 2 or video 3 terminal on the TV.

50