JVC EX-A3 Connecting the power cable

Preparation (continued) Do not turn on the power until you complete the connection.

Preparation

Outputting sound to an analog audio device

Input	Cassette
	tape player

Audio cable (not supplied)

Connecting the power cable

AC outlet

Main unit

(rear view)

•Connect the power cable after you complete the other connections.

•The [STANDBY] lamp on the main unit lights up.

Output

Main unit (rear view)

The audio output signal from the [LINE1 OUT] or [LINE 2 OUT] terminal is processed to resemble surround sound when the K2 function, clear voice function, 3D PHONIC function, or headphone surround mode function is activated. To record raw, unprocessed sound, turn off these functions. Do not turn the K2 function on or off while recording sound, as this may cause intermittent sound out- put.

•An audio signal from a device connected to the [LINE 2 IN] terminals is not output via the [LINE 2 OUT] terminals.

13