Selecting the video signal type

To view an image on the TV screen, select the video signal type correctly according to the TV after connecting the main unit to the TV.

1 Turn on the main unit.

•Refer to “Connecting the power cable” on page 13 and “Turning on the main unit” on page 14.

2 Press [DVD/CD 3].

•When a disc is loaded, press 7 to stop playback.

3 Press [SCAN MODE].

• The current video signal type flashes.

4 Press 2 or 3 to select the video signal type suitable for the TV.

•You can select “INTERLACE” or “PRO- GRESSIVE”. You can obtain better picture quality in “PROGRESSIVE” mode than in “INTERLACE” mode.

•Select “INTERLACE” when connecting to a TV that is only compatible with interlaced video signals.

•Select “PROGRESSIVE” when connecting to a TV that is equipped with a component terminal and is compatible with progressive video signals.

5 Press [ENTER].

NOTE

•To check the compatibility of your TV, contact your local JVC customer service center.

•All JVC-manufactured progressive TVs and high-definition TVs are fully compatible with this system.

•Even if the power cable of the main unit is dis- connected from the AC outlet or the power is interrupted, the video signal type setting is stored.

Preparation

10