Basic operations (continued)

Basic operations

Setting the clock

You can set the clock when the main unit is on or off.

Example: To set the clock to 10:30 a.m. on Wednesday

1 Press [CLOCK/TIMER].2 Press 2 or 3 to select the hour.

•Hold down 2or 3to incrementally increase the hour setting.

•You can also use the number buttons to specify the hour.

6 Press 2 or 3 to select the day of the week.

•Hold down 2 or 3 to change the setting for the day of the week.

•Abbreviations are used for the days of the week.

SUN→Sunday

MON→Monday

TUE→Tuesday

WED→Wednesday

THU→Thursday

FRI→Friday

SAT→Saturday

3

4

5

Press [ENTER].Press 2 or 3 to select the minute.

•Hold down 2 or 3 to incrementally increase the minute setting.

•You can also use the number buttons to specify the minute.

Press [ENTER].

7 Press [ENTER].

•The clock starts from 0 seconds in the minute you set.

NOTE

•While setting the clock, you can return to the previous step by pressing [CANCEL].

•The time display on the main unit is a 12-hour clock.

•The clock gains or loses approximately 1 minute per month.

•If the power cable of the main unit is discon- nected from the AC outlet or the power is inter- rupted, the clock setting is stored for approximately 1 minute.

Adjusting the clock

Press [CLOCK/TIMER] repeatedly to display the clock, and then adjust the clock starting from step 2.

Displaying the clock when using this system

Press [DISPLAY].

•Refer to “Changing the display in the display window”. (Refer to page 26.)

15