Operating the Main Menu (Cont.)
Changing the Color System
■Remote control unit
MENU/ENTER
AUTO is set for the color system when the projector is shipped from the factory. Normally, use it in AUTO. If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input.
OPERATE | COMPUTER VIDEO |
| T |
|
VOL. | ZOOM | FOCUS |
| W |
|
PAGE | MENU/ENTER | |
|
| |
BACK |
|
|
PRESET |
|
|
QUICK |
| AV |
ALIGN. |
| MUTING |
button
Cursor buttons
1 Press the MENU/ENTER button.
• The main menu is shown on the screen.
2 Select “DECODER” with the cursor button 5 or °.
•The selected item (displayed in text) is shown in magenta color on the screen.
3 Set the color system with the cursor button 2 or 3.
•Each time you press the cursor button 2or 3, the color system changes as follows.
3 : Forward / 2 : Backward
PAGE BACK button
■Main menu
V I D E O | N T S C ( 4 8 0 i ) |
P I X E L C L O C K
P O S I T I O N
P I C T U R E
S O U N D
O P T I O N S
S O U R C E
D E C O D E R A U T O ( N T S C ( 4 8 0 i ) )
L A N G U A G E E N G L I S H
Color system (DECODER) display
Note
•When
AUTO | Normally, set to AUTO. The color | |
|
| system of a signal being input is |
|
| |
|
| automatically identified. |
|
|
|
NTSC(480i) | Dedicated to NTSC(480i). | |
NTSC4.43 | Dedicated to NTSC4.43. |
PAL | Dedicated to PAL. |
SECAM | Dedicated to SECAM. |
Memo
About automatic signal identification
•AUTO is selected when shipped from the factory. In AUTO, the color system (DECODER) of the signal being input is automatically identified and indicated in ( ). Refer to the main menu display.
•If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input. When the dedicated color system is set, be careful as automatic identification does not work.
¦To finish the main menu, press the PAGE BACK button.
ENGLISH
35
G1000[D] | 35 | 99.2.24, 5:51 PM |
