JVC GD-V4211PCE, GD-V4210PCE-G, GD-V4210PZW-G Parts Identification, Remote Control

Parts Identification

Remote Control

1

DISPLAY ASPECT POWER

2

3VIDEO A VIDEO B COMPO. RGB

4	MUTING		VOLUME
	MULTIPLE	MONITOR	ADJUSTMENT
5	MODE	ID SET	ID

MENU/EXIT

6

7

8

9

p

q

RM-C575 REMOTE CONTROL UNIT

1Remote signal transmission window

2DISPLAY button (page 14)

Use this button to display the input terminal, color system (for VIDEO A or B input), scan system (for COMPONENT input) and horizontal/vertical frequency (for RGB input). Pressing the button again will make the display disappear.

3VIDEO A, VIDEO B, COMPO. and RGB buttons (page 14)

Use these buttons to switch between inputs.

To select the correct RGB input, you have to set “RGB INPUT” correctly on the menu (see page 23).

•Only for GD-V4210PCE, GD-V4210PCE-G and GD-V4211PCE: Only RGB input can be reproduced.

To reproduce images through the other inputs, you need to install video interface kit (IF-C421P1W), which is separately purchased.

4MUTING button (page 14)

Use this button to turn off the volume immediately. Pressing the button again will resume the previous volume level.

5MULTIPLE MONITOR ADJUSTMENT buttons (page 31)

Use these buttons to set IDs, etc. when serial connection is made.

6MENU/EXIT button

Use this button to display or erase menus.

While a sub-menu is displayed, pressing this button will move you one screen back to the preceding menu.

7Remote control cable jack (page 31)

Connect the remote control cable when using this remote control as a wired remote control.

8ASPECT button (page 15)

Use this button to switch between aspect ratios. Each time you press the button, the aspect ratio changes as follows:

REGULAR FULL

PANORAMIC ZOOM

9POWER button (page 14)

Use this button to turn on/off the power.

pVOLUME + / – buttons (page 14)

Use these buttons to adjust the volume level.

q2 / 3 / 5 / ∞ buttons

Use these buttons to select menu items or make adjustments.

4