JVC GR-DLS1 manual 62 EN, Dubbing, Make Connections, Start Playback, Pause Recording

END RECORDING

Press the Stop button (5) to stop the source tape, and engage the VCR’s stop mode.

62EN

Dubbing

EDITING

You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR’s instruction manual for details.

Remote sensor

Play button

Stop button

Lock button

		P
		L
		A
		Y
5S	M	AOFF

Power Dial

VCR

(Recording deck)

T W

DISPLAY

ON/OFF button

PLAY

RM-V711U STOP (provided)

1 MAKE CONNECTIONS

Connect the camcorder to your VCR as shown in the illustration on page 58.

Please also refer to your VCR's instruction manual before dubbing.

2 START PLAYBACK

Press the Play button (4) to play back the source tape.

3 START RECORDING

While watching on the connected TV, engage your VCR’s record mode from the spot on the source tape you want to begin recording.

4 PAUSE RECORDING

Engage your VCR’s pause mode to stop recording a segment.

5

NOTES:

●You can use Playback Zoom (☞ pg. 54) or Playback Effects (☞ pg. 55) in step 2.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do appear during dubbing, they are being recorded onto the new tape.

To clear the Playback Sound Mode Display, press DISPLAY on the RM-V711U Remote Control.

●Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 56) to show or hide the Date/Time and the Time Code on the recording.

●To show or hide all indications, press the ON/OFF button on the camcorder for longer than 1 second.