EN
65
Random Assemble Editing
Using the
|
|
|
|
| To EDIT jack |
|
| To remote |
|
|
|
|
|
|
| pause connecter | |
|
|
|
|
|
|
|
| |
|
|
|
|
| Core filter | Editing cable |
| |
|
|
|
|
| (provided) |
| ||
|
|
|
|
|
|
| ||
Remote sensor |
|
|
|
|
|
|
| T W |
|
|
|
|
|
|
| PLAY |
|
|
|
|
| To AUDIO IN |
| R.A. EDIT |
| |
|
|
|
| connector (L/R) |
|
| ||
|
| VIDEO/AUDIO |
| ON/OFF |
| |||
Core filter |
|
|
|
|
| |||
|
|
|
|
|
| |||
| cable (provided) |
| White to AUDIO L |
|
| |||
|
|
|
|
| ||||
To AV OUT connector | To |
| Red to AUDIO R |
| ||||
|
|
| ||||||
VIDEO IN |
|
|
| VCR | ||||
|
|
|
|
|
| |||
Core filter |
| connector | Yellow to VIDEO |
| ||||
| (Recording deck) | |||||||
|
|
|
|
|
|
| ||
To | To |
|
|
| ||||
connector | (provided) |
| IN connector |
|
|
| ||
Source tape (Camcorder) |
|
|
|
| New tape (VCR) |
|
| |
1 MAKE CONNECTIONS
Make sure that the playback picture and sound are available on the connected TV (☞ pg. 58).
•Connections should be made while the power is off. Making connections with the power on can lead to electrical shock or malfunctions.
2 START SOURCE PLAYBACK First turn the Power Dial to “PLAY” while pressing down the lock button located on the dial. Press PLAY and then press R.A. EDIT ON/ OFF on the remote control. Make sure to point the remote control at the camcorder’s remote sensor.
•The Random Assemble Editing Menu appears on the TV screen or the LCD monitor.
3 EXECUTE FADE/WIPE IN (IF NECESSARY)
Press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.
•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1.
NOTES:
●When using a JVC VCR with a remote pause terminal, connect the EDIT jack on the camcorder to the VCR’s remote pause terminal using an editing cable.
●If you use a JVC VCR not equipped with a remote pause terminal or a
●Before Random Assemble Editing, make sure the indications don't appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound Mode Display, press DISPLAY on the RM-
V711U Remote Control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 56) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, press ON/OFF on the camcorder for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.
CONTINUED ON NEXT PAGE
