To Perform High-Speed Search . . .
.... press 2 or 3 after pressing 6/4. The tape will
move at approximately 9 times the normal playback speed. Watch in the LCD monitor and, when you reach the spot you want to see, press 6/4and normal playback resumes.
.... during playback, press and hold 2 or 3. The
search continues as long as you hold the button. Once you release it, normal playback resumes.
.... a slight mosaic effect appears on screen during
High-Speed Search. This is not a malfunction.
Playback Sound
You can hear sound from the speaker or using headphones connected to the headphones connector during playback. To adjust the sound volume, slide the VOL. switch. The sound volume indication is displayed. Slide the VOL. switch towards “+” to turn up the volume, or towards
Still Playback
To temporarily stop playback, press 6/4. Press again to resume playback. If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the stop mode, the camcorder’s power is automatically turned off.
EN
53
Slow-Motion Playback
●To perform
●To change from normal to
●During
●After the Slow Rewind or Slow Forward button is pressed, the still image may be displayed for a few seconds, then the screen may become blue back for a few seconds. This is not a malfunction.
●There may be a small margin between the slow- motion playback start point you chose and the start point at which the camcorder actually begins playback in slow motion.
NOTES:
●The sound is not available during
●Copy guarded tapes cannot be played back. The screen becomes blue back.
