E-94
MENU SCREEN
Contents of Menu Screens (cont’d)
Item Set Value Contents
ZEBRA ● OFF Selects whether zebra patterns should be shown on the LCD
70 – 80% screen and the viewfinder screen, and sets the luminance level
85 – 95% of the subject areas where the zebra pattern is displayed
OVER 95% OFF: Not displayed.
OVER 100% 70 – 80% : Zebra pattern displayed in areas with a luminance
level of 70% to 80%.
85 – 95% : Zebra pattern displayed in areas with a
luminance level of 85% to 95%.
OVER 95% : Zebra patter n displayed in areas with a
luminance level above 95%.
OVER 100% : Zebra pattern displayed in areas with a
luminance level above 100%.
LCD Adjusts the brightness of the LCD screen.
BRIGHTNESS To brighten ... Make value higher
To dim ... Make value lower
LCD COLOUR Adjusts the colour saturation of the LCD screen.
Higher colour saturation..... Make value higher
Lower colour saturation .....Make value lower
LCD PEAKING Adjusts the contrast of the LCD screen.
To make contours sharper ...Make value higher
To soften contours ... Make value lower
VF Adjusts the brightness of the viewfinder screen.
BRIGHTNESS To brighten...... Make value higher
To dim............. Make value lower
VF COLOUR Adjusts the colour saturation of the viewfinder screen.
Higher colour saturation..... Make value higher
Lower colour saturation .....Make value lower
VF PEAKING Adjusts the contrast of the viewfinder screen.
To make contours sharper....... Make value higher
To soften contours ...................Make value lower
NEXT PAGE The DISPLAY [2/2] menu screen returns when the SELECT dial
is pressed. (Menu screen for selecting display items)
PAGE BACK The TOP MENU returns when the SELECT dial is pressed.
DISPLAY Menu Screen
MAX
4
1
● NORMAL
–1
–4
MIN
The DISPLAY Menu Screen consists of two screens (1/2 Screen and 2/2 Screen).
䡲 DISPLAY [1/2] Menu Screen
䡲 DISPLAY [2/2] Menu Screen
Item Set Value Contents
TAPE REMAIN ●ON Selects whether the remaining tape time indication should be
OFF shown on the LCD screen and the viewfinder screen.
ON : Displayed
OFF: Not displayed
TIME CODE ●ON Selects whether the time code should be shown on the LCD
OFF screen and the viewfinder screen.
ON : Displayed
OFF: Not displayed
Memo:
When the MODE switch is set to VTR (VTR playback /DV
mode), this item is not displayed.