E-75
䡲Whether or not zebra patterns should be displayed, and the
luminance level they should indicate, is selected by the
setting of the ZEBRA item on the DISPLAY [1/2] menu screen.
1.
Display the DISPLAY [1/2] menu screen.
1Press the MENU button to display the TOP MENU screen.
2Rotate the SELECT dial to select the DISPLAY SET item,
and then press the dial to display the DISPLAY [1/2] menu
screen.
2.
Use the SELECT dial to select the ZEBRA item, and set the
item to a value other than OFF.
3.
When you return to the normal screen, zebra patterns will appear
in the appropriate areas.
4.
Manually adjust iris, gain and shutter speed until the zebra
patterns disappear.
MANUAL ADJUSTMENTS
Displaying Zebra Patternsfor Adjustment
Zebra patterns are oblique stripes than can be displayed to indicate very bright areas of the screen.
Areas where zebra patterns are indicated are likely to be blurred with white if left unadjusted. The zebra
patterns can be used as a reference for manual adjustment of the brightness to adjust to the optimal
level.
Zebra patterns
LCD BRI
DISPLAY[12
]
/
GHTNESS NALORM
NALORM
NALORM
NALORM
NALORM
NALORM
LCD COLOR
LCD PEAKING
VF BRIGHTNESS
VF COLOR
VF PEAKING
NEXT PAGE
PAGE BACK
ZEBRA 70~80%
DISPLAY [1/2] menu screen
●Zebra patterns are not recorded
on the tape.
●Zebra patterns are not output
from the VIDEO OUT or Y/C
OUT connectors.
Setting Zebra Display
70 ~ 80% Areas with a luminance level of 70% to 80%
85 ~ 95% Areas with a luminance level of 85% to 95%
OVER 95% Areas with a luminance level above 95%
OVER 100% Areas with a luminance level above 100%
OFF Not displayed
Memo:
In the VTR playback mode (when the MODE switch is set to
VTR), the ZEBRA item is not shown on the DISPLAY [1/2]
menu screen.