E-83
MODE
CAM-B
VTRCAM-A
SHUTTER
MENU
GAIN
MODE switch
SELECT dial
MENU button
PLAYBACK
Outputting CH-3/CH-4 Channel Sound䡲 Confirm that the MODE switch is set to “VTR”.
1.
Press the MENU button to display the TOP MENU screen.
2.
Using the SELECT dial, select the VTR SET item, and then
press the SELECT dial.
●The VTR menu screen is displayed.
3.
Rotate the SELECT dial to align the cursor (f) with the PB.
AUDIO SELECT item, and then press the SELECT dial.
●The setting area starts blinking.
4.
Rotate the SELECT dial to make the settings.
CH1/CH2 : To reproduce the sound recorded during shooting.
MIX : To simultaneously reproduce the sound recorded
during shooting and the sound after-recorded on
CH-3 and CH-4.
CH3/CH4 : To reproduce the sound after-recorded on CH-3 and
CH-4.
5.
When the SELECT dial is pressed, the set value is confirmed.
6.
To return to the normal screen, use either of the following
methods.
●Press the MENU button
or
●Return to the TOP MENU screen and then select the EXIT
item before pressing the SELECT dial.
4 channels are available when the DV format is recorded with 12-bit, 32 kHz audio sampling. The GY-
DV300 records audio on the CH-1 and CH-2 channels. When the GY-DV300 is used for playbac k of tapes
with sound recorded on the CH-3 and CH-4 channels on another unit, the PB AUDIO SELECT item on
the VTR menu screen must be set.
Setting
TOP MENU screen
VTR menu screen
Setting
MENU
SYSTEM SET ..
VTRSET ..
DISPLAY SET. .
CLOCK / TC..
MENU ALLRESET CELANC
EXIT
PB AUD IVTR
OSELECT CH/21
REM FF /REW F
0
F
0
/
0
REW
200
MODE
PAGE BACK
DRUM HOUR