E-23
Normal display in the shooting mode
qwert
No. Item Contents
1Zoom ratio (Characters, Displayed during zoom operation. The characters indicate the wide-
numeric value) angle (W) and telephoto (T) zoom positions. The numeric value indicates
the approximate zoom ratio.
2Time code display Shows the time code (hours, minutes, seconds, frames).
Whether this should be displayed can be selected by setting the TIME
CODE item on the DISPLAY [2/2] menu screen.
3Recording time mode Shows the recording speed at the time of the recording.
indication SP : Standard Play mode
LP : Long Play mode
When the remaining tape indication is OFF, this indication is shown at
the 4 position.
4Remaining tape time Indicates the remaining tape amount (minutes) in 1-minute steps.
indication Whether this indication should be ON or OFF can be selected by setting
the TAPE REMAIN item on the DISPLAY [2/2] menu screen.
* The indication may not appear when a new tape is loaded, after the
tape runs, the indication appears.
* When used in a cold environment, it may take a little while before the
remaining tape time indication appears.
5Remaining battery The remaining battery power is indicated by four different indicators.
power indication
Blinking indicator
(no remaining
battery power)
Fully charged
battery