E-96
Item Contents
MASTER Adjusts the pedestal level (master black) which is the reference
BLACK of black.
To increase the pedestal level... Make value higher
To decrease the pedestal level... Make value lower
DETAIL Adjusts the contour (detail) enhancement level.
To sharpen contours.......... Make value higher
To soften contours ............. Make value lower
DTL. VH Sets the direction, horizontal (H) or vertical (V), in which detail
FREQUENCY enhancement is applied more strongly.
To apply stronger enhancement in H direction
...................................... Make value higher
To apply stronger enhancement in V direction
...................................... Make value smaller
V. RESOLUTION ●NORMAL Selects the increase of the vertical resolution.
V.MAX NORMAL: Standard vertical resolution (450 lines).
V.MAX: Increased vertical resolution (540 lines)
However, the sensitivity is degraded and the bright sections may
be coloured depending on the subject.
AUTO KNEE OFF To select whether the auto knee function should operate.
●ON OFF: Does not operate.
ON: Operates.
MENU SCREEN
Contents of Menu Screens (cont’d)
The CAMERA menu screen can only be set in the shooting mode.
The position (“CAM A” or “CAM B”) of the MODE switch is indicated after the menu title name.
CAMERA Menu Screen
Set Value
MAX
9
1
● NORMAL
-1
-9
MIN
AUTO KNEE function
When shooting a foreground subject, such as a human being, etc., with a high-
brightness background, if the brightness level is set for the foreground subject, the
background image will be blurred with white. In such a case, a clearer background
is obtained when the auto knee function is used.
This function is effective especially in the following cases:
●When shooting a human being indoors with a view to the landscape out through
a window.
●When shooting a human being in the shade on a fine day.
●When shooting a high-contrast scene.
* If a fast-moving high-brightness section like a car in sunlight is shot, the auto
knee function may change the brightness of the entire image along with the
motion of the object. In this case, set the auto knee function to OFF.
MAX
4
1
● NORMAL
-1
-4
MIN