8 |
| 107T5 |
Go to cover page
OSD Adjustments (Continued)
2) Press the button until ADJUST VERTICAL is highlighted. | 2) Press the button until ADJUST SHAPE is highlighted. |
3) Press the button. The ADJUST VERTICAL window appears. ADJUST POSITION should be highlighted.
4)Press the 
or 
button to move the image up or down.
5)When the position is adjusted, press the 
button to return to MAIN CONTROLS window, or press the 
button to highlight ADJUST SIZE.
6)To adjust the vertical size, press the 
or 
button.
7)When the size is adjusted, press the 
button to return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help After returning to MAIN CONTROLS . . .
.. . to continue to ADJUST SHAPE, press the 
button until ADJUST SHAPE is highlighted. Next, start with step 3 under ADJUST SHAPE and follow the directions.
. . . to exit completely, press the 
button
ADJUST SHAPE
ADJUST SIDE CURVE
ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use these features only when the picture is not square.
1)Press the 
button on the monitor. The MAIN CONTROLS window appears.
3)Press the 
button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted.
4)Press the 
button. The SIDE CURVE window appears. PINCUSHION should be highlighted.
5)To adjust the pincushion, press the 
or 
button.
6)When the pincushion is adjusted, press the 
button to highlight
BALANCED or press the 
button to return to the ADJUST SHAPE window.
7)To adjust the balanced pincushion, press the 
or 
button.
8)When the balanced pincushion is adjusted, press the 
button to return to the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted.
9)Press the 
button to return to the MAIN CONTROLS window, or press the 
button until ADJUST SIDE ANGLES is highlighted.
