OSD Adjustments (Continued) | 107T5 |
|
| 9 |
| Go to cover page |
| ||
Smart Help After returning to MAIN CONTROLS . . .
...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST SIDE ANGLES and follow the directions.
...to exit completely, press the 
button twice.
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above, then press the 
button, and follow steps 7 - 9.
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options. These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when the picture is not square.
1)Press the 
button on the monitor. The MAIN CONTROLS window appears.
2)Press the 
button until ADJUST SHAPE is highlighted.
3)Press the 
button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted.
4)Press the 
button to highlight ADJUST SIDE ANGLES.
5)Press the 
button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted.
7) When the trapezoid is adjusted, press the 
button to highlight
PARALLELOGRAM or press the 
button to return to the ADJUST SHAPE window.
8)To adjust the parallelogram, press the 
or 
button.
9)When the parallelogram is adjusted, press the 
button to return to the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted.
10) Press the button to return to the MAIN CONTROLS window, or press the 
button until ROTATE IMAGE is highlighted.
Smart Help After returning to MAIN CONTROLS . . .
...to continue to ROTATE IMAGE, start with step 5 under ROTATE IMAGE and follow the directions.
...to exit completely, press the 
button twice.
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then
press the 
button, and follow steps 7
ROTATE IMAGE
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the picture is not square.
1)Press the 
button on the monitor. The MAIN CONTROLS window appears.
2)Press the 
button until ADJUST SHAPE is highlighted.
3)Press the 
button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted.
4)Press the 
arrow until ROTATE IMAGE is highlighted.
6) To adjust the trapezoid, press the 
or 
button.
