Philips General Product Specification, Go to cover page, 17 V30 GS4 107T5-71K CMTR, Type

58 107T5

Go to cover page

GENERAL PRODUCT SPECIFICATION

4.2Image size (For preset modes only)

The dimensions of guaranteed display area to be measured along the picture center of horizontal and vertical axis of the screen as listed below: (preset modes only, refer to fig. 1)

Width	: 306 ￿ 3 mm
Height	: 230 ￿ 3 mm

4.3Image centering deviation (For preset modes only)

With respect to fig. 2, the target relationships are the following :

A- B ￿ 5 mm C- D ￿ 5 mm

Note : This centering is adjustable by the end-user.

4.4Picture shift control range (For preset modes only)

H-shift range : ￿ 10 mm min.

V-shift range : ￿ 10 mm min.

4.5Picture tilt

With respect to Fig. 3, Tilt to be measured on extremes of center line from bezel.

A- B : ￿ 2 mm

4.6Geometrical distortions (For preset modes only)

It is acceptable that pincushion, trapezoid, rhomboid, rotation and various waves distortions must remain within the limits of tolerance as in Fig. 4,

where A = B = 2.0 mm. C = D = 2.0 mm.

The waviness of any vertical or horizontal shall be less than 1.0 mm over a 50 mm distance.

4.7Image non-linearity (For preset modes only) Apply cross-hatch pattern with

12 equal blocks along horizontal axis,

9 equal blocks along vertical axis. (see Fig. 1)

		Overall :		￿ 10 %
		Adjacent :		￿ 6 % (For 64kHz mode H ￿ 8 %)
					X. max. - X. min.
		H. non-linearity =					x 100%
					X. Max.
					Y. max. - Y. min.
		V. non-linearity =				x 100%
					Y. Max.
			17" V30 GS4 107T5-71K CMTR
			TYPE		: 107T51/00
2003-01-07			BRAND		: PHILIPS
	Wayne Lin							30
					2003-01-07

59016