Philips V30 manual DDC Instructions, Re-programming EEPROM Software DDC, 107T5, Go to cover page

DDC Instructions

107T5 23

Go to cover page

Re-programming EEPROM (Software DDC)

Step 1: After initialize alignment box, connecting all cables and box as shown in Fig. 10

PC

Rear view of the monitor

Fig. 10

4.Click icon (Read EDID function) to read DDC EDID data from monitor. The EDID codes will display on screen as shown in Fig. 13.

Fig. 13

videocard	printerport(LTP1)
To	To

DC Power

8~12 V

~

Video cable

To

Monitor

Printer

Port

To PC

Step 3: Modify DDC data (verify EDID version, week, year)

1.Click (new function) icon from the tool bar, bring up Step 1 of 9 as shown in Fig. 14 .

EDID301 DDC application provides the function selection and text change (select & fill out) from Step 1 to Step 9.

Step 2: Read DDC data from monitor

1-1 Click the left key of Mouse, or hit any key on the keyboard, then the characters disappear from the screen.

1-2 Click icon as shown if Fig. 11 from the tool bar to bring up the "Configuration Setup" windows as shown in Fig. 12.

Fig. 11

2.Select the DDC2B as the communication channel.

Select "Enable" & fill out "F0" for Mapped EDID page address as shown in Fig. 12.

Fig. 14

Step 4: Modify DDC data (Monitor Serial No.)

1.Click Next till the Step 7 of 9 window appears as shown in Fig. 15.

2.Fill out the new Serial No. (for example, TY 503960, TY 123456).

3.Click Next till the last step window appears, then click Finish to exit the Step window.

Fig. 15

Fig. 12

3.Click OK button to confirm your selection.