12 |
| 107T5 |
Go to cover page
OSD Adjustments (Continued), Troubleshooting
DEGAUSS
EXTRA CONTROLS is a set of three features, including DEGAUSS. Degaussing removes electromagnetic build up that may distort the color on your screen.
1)Press the 
button on the monitor. The MAIN CONTROLS window appears.
2)Press the 
button until EXTRA CONTROLS is highlighted.
3)Press the 
button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted.
4)Press the 
button until DEGAUSS is highlighted.
5)To degauss your screen, press the 
button. Your screen will be degaussed, then the MAIN CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted.
Smart Help After returning to MAIN CONTROLS . . .
. . . to exit completely, press the 
button.
Monitor Specific Troubleshooting
Your monitor provides a
1.Turn off both your computer and the monitor.
2.Unplug the video cable from the back of the computer.
3.Turn on the monitor.
If the monitor is functioning properly, you will see a OSD message as shown in the following illustration:
ATTENTION
CHECK SIGNAL CABLE
This box also appears during normal system operation if the video cable becomes disconnected or damaged. This box will remain on for one minute, go off five seconds, then on for one minute, and will repeat cycle.
1.Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
2.While in
If your monitor screen still remains dark after you use the previous procedure, check your video controller and computer system; your monitor is functioning properly.
NO SIGNAL INPUT
If there is something wrong with the input signal, a message appears on the screen although the power indicator LED is
still on. The message may indicate that the monitor is NO SIGNAL INPUT or that you need to check the signal cable.
ATTENTION
NO SIGNAL INPUT
CLOSE MAIN CONTROLS
