OSD Adjustments (Continued) |
| 107T5 |
|
| 11 |
| Go to cover page |
| |||
4)Press the 
or 
button to select YES or NO. NO is the default. YES returns all settings to their original factory adjustments.
5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help After returning to MAIN CONTROLS . . .
.. . to continue to EXTRA CONTROLS, press the 
button until EXTRA CONTROLS is highlighted. Next, start with step 3 under EXTRA CONTROLS.
. . . to exit completely, press the 
button.
EXTRA CONTROLS
ADJUST MOIRE
EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern arising from the interference between two superimposed line patterns. To adjust your moire, follow the steps below. Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be affected.
1)Press the 
button on the monitor. The MAIN CONTROLS window appears.
2)Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted.
4)Press the 
button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted.
5)To adjust the horizontal moire, press the 
or 
button.
6)When the horizontal moire is adjusted, press the 
button to highlight
VERTICAL.
7)To adjust the vertical moire, press the 
or 
button.
8)When the vertical moire is adjusted, press the 
button to return to the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be highlighted.
Smart Help After returning to MAIN CONTROLS . . .
.. . to continue to DEGAUSS, press the 
button until DEGAUSS is highlighted. Next, start with step 3 under EXTRA CONTROLS, DEGAUSS.
. . . to exit completely, press the 
button.
3) Press the button. The EXTRA CONTROLS window appears. will ADJUST MOIRE will be highlighted.
