Philips General Product Specification, Go to cover page, 17 V30 GS4 107T5-71K CMTR, Type

60 107T5

Go to cover page

GENERAL PRODUCT SPECIFICATION

4.13Purity

Test patterns : Full white / Red / Green / Blue.

Conditions : As stated in item 4.0, the purity must be checked under specific destinations of earth magnetic environments and the monitor must be well degaussed.

After warming-up time of 30 min. , no color stains may occur in the above four patterns.

4.14Moiré

Condition: Display a full white pattern. At any preset mode , the display size must be set as Fig.1.

The clouding effect must not rise to disturbing levels in anywhere of the screen with luminance setting from 15 to 30 FL.

4.15Blemish

Blemish shall be in accordance with CRT specification.

5.0Mechanical characteristics

5.1User controls

-Power ON/OFF key

-LightFrame key

-3 Key digital user control (OSD)

5.2Connectors and cables

5.2.1Power cord type : 3 leads plugable power cord with protective earthed plug or IBM Hooded

Length		: 1.5 m ￿ 50 mm (excluding connector)
Safety requirements		: See following.
			Approval
	Countries	Mains plug	Wire	Connector
	Germany	VDE	VDE	VDE
	Switzerland	--	SVE	SVE
	Belgium	CEBEC	--	--
	Sweden	SEMKO	SEMKO	SEMKO
	Finland	EI	--	EI
	Norway	NEMKO	NEMKO	--
	Denmark	DEMKO	DEMKO	DEMKO
	Italy	OVE	--	OVE
	Netherlands	KEMA	KEMA	KEMA
	U.K.	ASTA	HAR	ASTA
	U.S.A.	UL	UL	UL
	Canada	CSA	CSA	CSA
	Australia	SAA	SAA	SAA

		17" V30 GS4 107T5-71K CMTR
		TYPE	: 107T51/00
2003-01-07		BRAND	: PHILIPS
	Wayne Lin			30
			2003-01-07

59018