JVC 0503-AH-ID-JVE, ENLPT0736-001B, HM-HDS4E Elapsed Recording Time Indication, Tape Remaining Time, Super VHS ET (S-VHS ET) Recording on VHS cassettes with S-VHS quality

Masterpage:Right-NoTitle0
EN 43
Filename [HM-HDS4EX_04Basic.fm]
Page 43 April 2, 2003 2:20 pm
Elapsed Recording Time Indication
1Set the counter display.
Press – –:– – so that a counter reading appears on the TV
screen and the front display panel.
●The front display panel shows
the counter reading with “:”
lit.
2Reset the counter.
Press 0000 before starting recording or playback.
●The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press MODE.
●The current tape remaining time and the current recording
speed alternate in the front display panel. You can also confirm
the information on the TV screen. (墌pg. 10)
NOTE:
Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
“– –:– –” may sometimes appear, or the display may blink on
occasion.
Super VHS ET (S-VHS ET)
— Recording on VHS cassettes with
S-VHS quality
You can record in SP mode on VHS cassettes with S-VHS picture
quality. Set “S-VHS ET“ to the desired mode (墌pg. 82).
?
HM-HDS4EX.book Page 43 Wednesday, April 2, 2003 3:55 PM