Index Search
Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.
1 | START SEARCH |
£. | |
| While the tape is stopped, press TIME SCAN ª or |
2 | ACCESS DISTANT CODE |
To access a recording | |
TIME SCAN ª or £ repeatedly until the correct | |
number is displayed on screen (only if "SUPERIMPOSE" | |
| is set to "ON" (☞ pg. 29). Playback begins automati- |
| cally when the desired recording is located. |
| ● If necessary press REW or FF when play starts to |
| search visually to find the very beginning of the |
| desired program. |
NOTE:
An index code is not placed on the tape when recording is paused and then resumed.
Instant ReView
At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recently recorded or timer- recorded program.
1 | ACTIVATE INSTANT REVIEW |
After ensuring that the Timer mode is disengaged, press | |
REVIEW. | |
| ● The power comes on and the VCR rewinds to the index |
| code indicating the start of the last |
| program, then begins playback automatically. |
| ● You can access a program |
| from the current position on the tape. If, for example, |
| you have 5 programs recorded and you want to |
| watch the third one, press REVIEW three times. |
| ● If necessary press REW or FF when play starts to |
| search visually to find the very beginning of the |
| desired program. |
| ● If the tape is already rewound when REVIEW is |
| pressed, it will play the tape from the beginning. It |
| will not fast forward to an index code. |
| ● The Instant Review function will also operate if the |
| VCR's power is on. |
E
N
27
Repeat Playback
START REPEAT
1 Press and hold PLAY (until "
" blinks on the front display panel) during playback, then release.
SP
| VCR | |
|
|
|
| ● The entire tape is played back 50 times. | |
|
|
|
2 | STOP REPEAT | |
To stop, press STOP at any time. | ||
NOTE: | ||
Pressing PLAY, REW, FF, PAUSE or TIME SCAN ªor
£also stops Repeat Playback.
Counter Reset
1 |
| RESET COUNTER TO ZERO |
| Press C.RESET. | |
| NOTE: | |
|
| By pressing the DISPLAY button, you can change the |
|
| display to show the counter reading, channel number |
|
| or clock time. (Channel number is not displayed during |
|
| playback.) |
|
|
|
Tape Position Indicator
The Tape position indicator |
|
|
|
|
|
| ||
appears on screen when, from the |
|
|
|
|
|
| ||
stop mode, you press FF, REW, or |
|
|
|
|
|
| ||
perform an Index Search or Instant |
|
|
|
|
|
| ||
ReView. The position of " |
| " in |
|
|
|
|
|
|
relation to "B" (Beginning) or "E" | B | + | + | + |
| E | ||
| ||||||||
(End) shows you where you are on |
| |||||||
|
| COUNT |
| 0:33:27 | ||||
the tape. |
|
|
| |||||
NOTES:
●"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 29).
●It may take a few seconds for the Tape Position Indicator to be displayed.
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, ensure that the VCR is in stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the cassette's record safety tab is removed.
