CH
MENU
OK
0 4
SKIP SEARCH
1
TIME SCAN
OK
MENU
"CA(Commercial Advance) RECORD" and "CA PLAYBACK" are set to " OFF " at the factory. To set Commercial Advance perform the following steps to set "CA RECORD" to "ON" and "CA PLAYBACK" to "AUTO".
ACCESS MAIN MENU SCREEN
1 | Press MENU. |
2 | ACCESS FUNCTION SET SCREEN |
Move the highlight bar (arrow) to "FUNCTION SET" by | |
pressing CH 5°or TIME SCAN %Þ, then press OK or | |
TIME SCAN%. |
SELECT CA RECORD SET MODE | ||||
Move the highlight bar | FUNCTION |
|
| |
(arrow) to "CA RECORD" |
|
| ||
=AUTO TIMER | OFF |
| ||
3 by pressing CH 5° or | AUTO SP=EP TIMER | OFF | ||
| SUPERIMPOSE | ON | ||
TIME SCAN %Þ, then | DIGITAL R3 | ON | ||
press OK or TIME SCAN% | ||||
VIDEO STABILIZER | OFF | |||
to set to "ON". | 2ND AUDIO RECORD | OFF | ||
| NEXT PAGE |
|
| |
| SELECT WITH (5,°) AND (OK) | |||
| PRESS (MENU) TO END | |||
| PREVIOUS PAGE |
|
| |
| REAR AUX INPUT | VIDEO | ||
| TAPE DUB MODE | ON | ||
| =CA RECORD | ON |
| |
| CA PLAYBACK | OFF |
| |
| SELECT WITH (5,°) AND (OK) | |||
| PRESS (MENU) TO END | |||
E
N
33
SELECT CA PLAYBACK SET MODE
4 Move the highlight bar (arrow) to "CA PLAYBACK" by pressing CH 5° or TIME SCAN %Þ, then press OK or TIME SCAN % to set to "AUTO".
● Select "AUTO" to automatically skip over
CA recorded commercials during playback.
●Select "MANUAL" to manually skip over CA recorded commercials by pressing SKIP SEARCH.
●Select "OFF" to disable CA Playback of CA recorded commercials.
●Press SKIP SEARCH during playback, with "MANUAL" (or "AUTO") selected, to
NOTE:
If you press SKIP SEARCH during a commercial, the VCR may not resume normal playback at the end of the group of commercial. If this occurs press PLAY or STOP to resume normal playback.
RETURN TO NORMAL SCREEN
5 Press MENU.
NOTES:
●If you set "CA RECORD" to "ON" while recording is in progress, the VCR will mark an index code at that location.
●You cannot change the "CA PLAYBACK" setting during Commercial Advance
●While recording is in progress with "CA RECORD" set to "ON", you cannot mark an index code manually, nor change the recording tape speed.
●During playback with "CA PLAYBACK" set to "OFF", pressing SKIP SEARCH starts
●If there is a power outage while recording is in progress with "CA RECORD" set to "ON", commercials that are recorded after the power is restored may not be detected properly.
●If you want to stop recording when "CA RECORD" is set to "ON", be sure to press STOP. If you press POWER or TIMER to stop recording, that may affect detection accuracy for commercials recorded afterwards.
U.S. Pat. No. 5,333,091
