JVC HR-S9500U manual TimeScan Audio, Speed Audio output, Pro-Slow, Audio is

EN39

TimeScan

Names of special-effects playback

Speed

Audio output

Reverse

Forward

Search

Play

Slow-Motion

Still*

Slow-Motion

Play

Search

(Pro-Slow)**

(Pro-Slow)**

-7x

-5x

-3x

-1x

-1/2x

-1/3x

0

1/3x

1/2x

1x

1.5x

2x

3x

5x

7x

Audio is output.

Audio is

Audio is

Audio is

Audio is output.

not output.

output.

output.

** Still mode cannot be engaged using the TIME SCAN buttons. Still mode can only be engaged by pressing the PAUSE button.

**Smooth slow motion delivering an uninterrupted moving image without distortion.

●The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.

●The TimeScan search speed is the same for SP and EP recordings.

●To resume normal playback, press PLAY.

●Picture may be distorted at the position where the recording speed is switched.

●The picture may be noisy for a moment when you change the playback speed.

●During high-speed search with a tape containing both SP and EP recordings, the search speed will change automatically to 7x normal playback speed with TimeScan when the recording tape speed switches from EP to SP.

●Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.

●Picture may appear distorted in comparison to normal playback.

●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

●TimeScan sound quality will differ in comparison to normal playback.

●When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x normal speed, the audio playback may be faster than normal.

●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

●±1/3x slow-motion playback is possible with SP recordings only.

●Depending on the type of tape contents, the sound may not be clear during forward slow-motion playback.

●Pro-Slow cannot be activated by pressing PAUSE for longer than 2 seconds.

●Depending on the type of tape in use, noise may appear during Pro-Slow. When this happens, try manual tracking (☞ pg. 26).

●The operations by the JOG dial/SHUTTLE ring do not include TimeScan; noise will appear on the screen and audio will not be output.

If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF".

TimeScan Audio

The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required. *The default setting is "ON".

1Press MENU to access the Main Menu screen.

2Move the highlight bar (arrow) to "FUNCTION SET" by press- ing CH5°or TIME SCAN%Þ, then press OK or TIME SCAN

%.

3Move the highlight bar (arrow) to "TIMESCAN AUDIO" by pressing CH5°or TIME SCAN %Þ, then press OK or TIME SCAN %to select to "ON" or "OFF".

4Press MENU to return to the normal screen.

FUNCTION		PREVIOUS PAGE
=AUTO TIMER	OFF	AUDIO MONITOR	HI-FI
SUPERIMPOSE	ON	S-VHS MODE	ON
AUTO SP=EP TIMER	OFF	AV COMPU-LINK	ON
DIGITAL R3	ON	VIDEO CALIBRATION	ON
VIDEO STABILIZER	OFF	=TIMESCAN AUDIO	ON
2ND AUDIO RECORD	OFF	FRONT AUX INPUT	VIDEO
NEXT PAGE		NEXT PAGE
SELECT WITH (5,°) AND (OK)		SELECT WITH (5,°) AND (OK)
PRESS (MENU) TO END		PRESS (MENU) TO END