JVC HR-S9500U manual Perform Movie Advance

SKIP MENU

=MOVIE ADVANCE

MOVIE ADVANCE (PREVIEW) SKIP SEARCH

PRESS (5,°), THEN (OK)

PRESS (SKIP) TO CANCEL

LOAD A CASSETTE

Insert a cassette that has a prerecorded movie (rented or purchased), with no safety tab, into the VCR. Playback begins automatically.

ACCESS SKIP MENU SCREEN

Press SKIP SEARCH.

SELECT MODE

Movie Advance

This feature helps you locate certain parts of prerecorded movies (rented or purchased) and works in two ways.

● You can go to the beginning of the movie, skipping over all previews.

● You can fast-motion the tape to the beginning of the next preview, so you can skip over previews one by one.

LAY 1

EN31

SKIP SEARCH

TIME SCAN

3	OK
MENU

ATTENTION

Movie Advance and Movie Advance (Preview) works only on prerecorded cassettes that have been recorded in the SP mode, and have no safety tab. If the VCR detects the EP mode after you press OK in step 4, the following screen appears.

MOVIE ADVANCE

MOVIE ADVANCE CAN NOT

BE SELECTED FOR EP

RECORDINGS.

PRESS (SKIP) TO CANCEL

Skip Search will work for prerecorded

EP tapes.

When "MOVIE ADVANCE" is selected...

●If you want to stop searching for the start of the movie, simply press SKIP SEARCH or STOP.

When "MOVIE ADVANCE (PREVIEW)" is selected...

●If SKIP SEARCH was inadvertently pressed, press it again to resume normal playback.

●While the VCR is searching for the next preview, if you see a preview you wish to view, press SKIP SEARCH and the VCR will immediately go to the start of that preview.

●If the VCR starts to reverse to a preview you do not wish to view, press SKIP SEARCH to initiate searching to the next preview.

NOTES:

●Normally there is a period of black and no audio at the beginning and end of previews. The Movie Advance feature detects those parts where the picture fades to black and the audio fades to silence, and initiates fast-motion to skip over the detected previews.

●Some previews may not be detected and Movie Advance may not work properly.

●The setting you selected in step 3 remains in effect until the cassette is ejected.

●"MOVIE ADVANCE (PREVIEW)" does not use TimeScan when searching for the next preview.

Patents Pending

1

2

3 Press CH 5° or TIME SCAN %Þto move the highlight bar (arrow) to your choice.

a– Select "MOVIE ADVANCE" if you want to advance directly to the beginning of the movie.

b– Select "MOVIE

ADVANCE (PREVIEW)" if you want to advance to the next preview.

c– Select "SKIP SEARCH*" if you do not want to perform Movie Advance, then press OK to go back to the normal screen. Pressing SKIP SEARCH activates the Skip Search function (☞ pg. 26 ).

*If "CA PLAYBACK" is set to "AUTO" or "MANUAL" (☞ pg. 33), "COMMERCIAL ADVANCE" will be displayed on the screen instead of "SKIP SEARCH".

4	PERFORM MOVIE ADVANCE
	a– If you selected "MOVIE ADVANCE" in step 3 and
		press OK, the following screen will appear with a
		blue background. The VCR will rewind the
		beginning of the tape, then will fast-motion to the
		beginning of the movie. "READY" will appear and
		blink when the beginning of the movie is detected
		and the Stop mode will be engaged. Press PLAY to
		view the movie.
		MOVIE ADVANCE	MOVIE ADVANCE
		SEARCHING FOR BEGINNING	READY
		OF MOVIE.
			PRESS (PLAY) TO START
		PRESS (STOP) TO CANCEL	PRESS (STOP) TO CANCEL
	b– If you selected "MOVIE ADVANCE (PREVIEW)" in
		step 3 and press OK, the VCR will fast-motion to the
		beginning of the next preview and normal playback
		will resume when it is detected.
		Each press of SKIP SEARCH fast-motions to the
		beginning of the next preview, thereby skipping over
		one preview each time.
		The tape will forward-search a little past the start of
		the next preview, then will reverse-serach to the
		beginning of the preview and start playback.